This bit crown profile is offered
in standard impregnation depths of 6 mm (0.24 inch), 9 mm (0.35 inch) and 12 mm
(0.47 inch). Note that impregnation depths greater than 9 mm (0.35 inch) are
NOT available matrix core bits as well as those with kerf widths of less than
0.33 inch (8.4 mm). Customer specified impregnation depths of up to 14 mm (0.55
inch) are available on request for core bits with kerf widths of 0.39 inch (10
mm) or greater.
Thursday, 18 April 2013
Wednesday, 17 April 2013
Impegration Depth
The term "impregnation depth" refers to the
thickness of the diamond impregnated matrix layer on a core bit crown as shown
in the illustration to the right. The variable “y” is used to define the
impregnation depth dimension for a particular core bit.
IDP offers many sizes of core bits with standard impregnation depths of 6 mm (0.24 inch), 9 mm (0.35 inch) and 12 mm (0.47 inch). Other customer defined impregnation depths are available on request. Unless otherwise specified, a standard 9 mm impregnation depth is supplied for most North American sizes of core bits while a standard 6 mm impregnation depth is supplied for all thin-walled metric “I”, “T”, “TT”, “T2” and “T6”-series core bits.
As the price of an impregnated core bit increases from a 6 mm impregnation depth through to a 12 mm impregnation depth, consideration should be given to the economics of selecting a particular impregnation depth. While the initial cost of a core bit with a 6 mm depth of impregnation is relatively low, the expected overall bit life will also be lower than that of a bit with a thicker impregnation depth. For this reason, a 6 mm impregnation depth is generally recommended for use in shallow drill holes or for non-Wireline applications where more frequent bit changes are not objectionable. Conversely, the higher initial cost of a core bit with a 12 mm impregnation depth is largely offset by its inherently long bit life when used to drill extremely deep holes. The cost saving benefit is realized through reduced down time on the drill rig that would otherwise be required for tripping the drill string for bit changes.
IDP offers many sizes of core bits with standard impregnation depths of 6 mm (0.24 inch), 9 mm (0.35 inch) and 12 mm (0.47 inch). Other customer defined impregnation depths are available on request. Unless otherwise specified, a standard 9 mm impregnation depth is supplied for most North American sizes of core bits while a standard 6 mm impregnation depth is supplied for all thin-walled metric “I”, “T”, “TT”, “T2” and “T6”-series core bits.
As the price of an impregnated core bit increases from a 6 mm impregnation depth through to a 12 mm impregnation depth, consideration should be given to the economics of selecting a particular impregnation depth. While the initial cost of a core bit with a 6 mm depth of impregnation is relatively low, the expected overall bit life will also be lower than that of a bit with a thicker impregnation depth. For this reason, a 6 mm impregnation depth is generally recommended for use in shallow drill holes or for non-Wireline applications where more frequent bit changes are not objectionable. Conversely, the higher initial cost of a core bit with a 12 mm impregnation depth is largely offset by its inherently long bit life when used to drill extremely deep holes. The cost saving benefit is realized through reduced down time on the drill rig that would otherwise be required for tripping the drill string for bit changes.
Tuesday, 16 April 2013
Impregnated diamond matrices with matrix layer
IDP manufactures a range of impregnated diamond matrices
with matrix layer metal bonds that range from hard, abrasion-resistant types to
soft, ductile types. In general, a hard, abrasion-resistant matrix would be
used to drill a soft, abrasive, unconsolidated formation while a soft, ductile
matrix would be used to drill an extremely hard, non-abrasive, consolidated
formation. The idea is to match the bit matrix hardness to the formation
hardness in order that the metal bond of the matrix layer will erode at a
controlled rate during normal drilling operation. This controlled erosion of
the matrix layer metal bond will in turn continually expose new layers of sharp
synthetic diamonds until the matrix layer of the bit crown is totally consumed.
Monday, 15 April 2013
Construction of Impregnated Diamond Type
![]() |
| Impregnated Bits |
The basic
construction of Impregnated bits features a sintered powdered metal crown that is
fused to a steel tool body or shank. The powdered metal crown is composed of
two layers: the “matrix” layer which cuts the rock and the “backing” layer
which connects the matrix layer to the steel tool body and serves to support
the gauge diameter protection hard materials.
The cutting media that is used in impregnated bits is NATURAL diamond. The material has a distinct advantage over the natural mined industrial diamond that is used in surface-set bits in that it is an engineered material that has measurable, controlled physical properties, particularly in the areas of crystal friability and crystal geometry.
The cutting media that is used in impregnated bits is NATURAL diamond. The material has a distinct advantage over the natural mined industrial diamond that is used in surface-set bits in that it is an engineered material that has measurable, controlled physical properties, particularly in the areas of crystal friability and crystal geometry.
Saturday, 13 April 2013
Impregnated Diamond Type
The
impregnated diamond core bit has emerged as the most commonly used type in the
mineral exploration industry. The advantages of using impregnated diamond core
bits over bits manufactured with other cutting media include:
- An extremely wide range of application.
- A simple crown geometry that makes them less susceptible to in-hole damage than bits produced with other types of cutting media and as such are more tolerant of changing or banded geological formations.
- Their multi-layered cutter arrangement results in better overall bit life than bits produced with other types of cutting media. They are particularly well-suited for drilling in hard, consolidated, non-abrasive formations.
Their multi-layered cutter arrangement
results in better overall bit life than bits produced with other types of
cutting media. They are particularly well suited for drilling in hard,
consolidated, non-abrasive formations..
Subscribe to:
Posts (Atom)

